Give your Challenger a retro touch with nostalgic Quarter Scoops from Retro USA.
Quarter Scoops are styled after 71’ Challenger RT.
Quarter Scoops are injection molded TPO and are shipped ready to paint. Attaches to vehicle using 3M“ attachment tape.
Price: $199.00
Challenger Quarter Scoop Set
Challenger Headlight Covers
GTS Dodge Challenger Headlight Covers
For that custom, dark smoke look your looking for, turn to these GT Styling acrylic headlight covers. GT Styling is a leading manufacturer of automotive aftermarket styling accessories. An award-winning company for both its products and people, GT Styling is a consumer-driven organization that is dedicated to its distribution network. Designed to match the smooth curves of your Challenger, these covers install easily and are a snap to remove and reinstall. Easy installation - no tools or drilling required. Your choice of either smoke, carbon fiber or clear covers. Custom designed for a perfect fit.
Price: $79.99
Headlight Covers, Set of 2
Smoke or Clear
Choice:
Price: $86.99
Headlight Covers, Set of 2
Carbon Fiber
Chrome Parts & Accessories
Dodge Challenger (2008-2012) Chrome Fuel Cap
This replacement fuel filler door from Mopar adds a classic, clean look to your Challenger. Features a chrome-plated finish that surrounds a black center and a pleasing, smooth door operation. Installation requires no-drilling and can be done in the driveway in less than 15 minutes using a T-30 Torx bit screwdriver.
Direct replacement
Classic, muscle car styling
Chrome-plated finish
No dill installation
Meets all Chrysler corrosion standards
Includes instructions
Price: $189.99
Chrome Fuel Cap
Challenger Chrome Washer Sprayer Covers
Get your Challenger's exterior hood looking sharp with these Chrome Washer Sprayer Covers from Action Artistry. Constructed from 6061 T6 billet aluminum, these unique pieces install directly over your existing Washer Sprayer using pre-applied, automotive-grade adhesive with no fabrication required. Simply prep the surface, then place, peel, and stick. Easy installation and precision craftsmanship make this a great way to set your Challenger apart from the rest.
Constructed from 6061 T6 billet aluminum
Spcifically tailored for your Dodge Challenger
No drilling, cutting, or fabrication required
Price: $42.99 Set of 2
Challenger Chrome Washer Sprayer Caps
Challenger Chrome Aero Blade Trim Set of 2
Get your Challenger's exterior hood, trunk or side of your vehicle looking sharp with these Chrome Aero Blades from Action Artistry. Constructed from 6061 T6 billet aluminum, these unique pieces install directly where ever you would like to show them off using pre-applied, automotive-grade adhesive with no fabrication required. Simply prep the surface, then place, peel, and stick. Easy installation and precision craftsmanship make this a great way to set your Challenger apart from the rest.
Constructed from 6061 T6 billet aluminum
Spcifically tailored for your Dodge Challenger
No drilling, cutting, or fabrication required
Price: $52.99
Chrome Aero Blade, Set of 2
Challenger Trunk Lid Liner - Polished 2008-2012
Dress up your Challenger with our Polished - Stainless Steel, Trunk Lid Liner with Brushed cap. This trim piece is designed to fit on the stock trunk lid and add a clean stylish look to your Challenger.
100% Stainless Steel.
High Polished, mirror finish with Brushed cap.
Will not tarnish, fade or rust.
Adds a unique look and style to your car.
Easy "bolt-on" installation takes one hour, with supplied hardware.
Fits all 2008-2012 Challengers.
Made in USA!
Price: $299.00
Challenger Trunk Lid Liner - Polished 2008-2012
2009-11 Challenger - T1 Series Hood Scoop - Style 2 (Mesh Look) - 2 PC
Price: $85.00
Mesh Style Hood Scoop Inserts
T-Rex Dodge Challenger 2-Pc T1 Series Headlamp Bezels
2008-2014
Customize the look of your new Dodge Challenger with these stylish headlamp bezels from T-Rex. The T-Rex 2-Pc T1 Series Headlamp Bezels are constructed from stainless steel, and then polished to give your Dodge Challenger a custom look.
Constructed from stainless steel
Polished for a custom look
Sold as a 2-pc set
Price: $149.99 Set
Challenger 2-Pc T1 Series Headlamp Bezels
GT Styling Fog Light Covers 08-10
Smoke, Clear or Carbon Fiber
Designed to match the smooth curves of your Challenger, these covers install easily and are a snap to remove and reinstall. Easy installation - no tools or drilling required. Your choice of either smoke, carbon fiber or clear covers. Custom designed for a perfect fit.
For that custom, dark smoke look your looking for, turn to these GT Styling acrylic taillight covers. GT Styling is a leading manufacturer of automotive aftermarket styling accessories. An award-winning company for both its products and people, GT Styling is a consumer-driven organization that is dedicated to its distribution network. Designed to match the smooth curves of your Challenger, these covers install easily and are a snap to remove and reinstall. Easy installation - no tools or drilling required. Custom designed for a perfect fit.
Price: $79.99
Taillight Covers, Set of 2
Smoke or Carbon Fiber
Color:
GT Styling Dodge Challenger 08-10 Smoke or Carbon Fiber
Rear Tail Light Center Panel Cover
For that custom, dark smoke look your looking for, turn to these GT Styling acrylic center panel covers. Your choice of either the closed solid panel or the open center area for the backup light and Dodge logo showing. GT Styling is a leading manufacturer of automotive aftermarket styling accessories. An award-winning company for both its products and people, GT Styling is a consumer-driven organization that is dedicated to its distribution network. Designed to match the smooth curves of your Challenger, these covers install easily and are a snap to remove and reinstall. Easy installation - no tools or drilling required. Custom designed for a perfect fit.
Solid Smoke Panel
Solid With Open Center for logo and Backup Light
Price: $79.99
Solid Smoke or Open Center Smoke Panel
Color:
Price: $89.99
Solid Carbon Fiber or Open Center Carbon Fiber Panel
Color:
GTS, SOLARWING II
The new GTS SOLARWING II is a great addition to the Challenger, installs in 15 minutes, comes in a smoked finish (but can be painted) and looks great on the car.
Price: $159.99
GTS SolarWing II
Rear Window Louver, Aluminum, Now in Stock!
2001-2011, Our newest product is the rear window louver for the Challenger. Made out of Aluminum. Louvers can be painted for a custom look. The louvers attach with stainless steel hardware that attachs to the rear glass and are not hinged, Louvers are removable. Paint additional cost.
Price: $529.99
Aluminum Rear Window Louver
Rear Window Louver, ABS, 09-11
Our newest product is the rear window louver for the Challenger. Made out of ABS Material. Louvers can be painted for a custom look. The louvers attach with stainless steel hardware that attachs to the rear glass and are not hinged, Louvers are removable. Paint additional cost, Installs easy.
Price: $319.99
Rear Window Louver ABS
Side Window Louver, Large
These Louvers are made out of smooth ABS material for easy painting. Product must be painted before installation. The slats are not cut out, attaches with 3M double side tape. Paint additional cost.
Price: $199.00
Side Window Louvers Large Vent Set
Side Window Louver Small
Made out of smooth ABS material for easy painting. Product must be painted before installation. Attaches with 3M double sided tape. Slats are not cut out.Paint additional cost
Price: $199.00
Side Window Louvers Small Vent Set
Side Window Scoop
Made out of smooth ABS material. Easy to install. No cut out in the scoop. Fully enclosed.
Attaches with 3M double side tape. Paint additional cost
Price: $199.00
Side Window Scoop Set
GT Styling Quarter Side Window Louver
The new GTS quarter window louvered smoked quarter window panel is a stylish component, comes in a set of two. It is a simple tape on installation, priced inexpensively, and does not require painting.
Price: $139.99, Set of 2
GT Styling Quarter Side Window Louver
Challenger Side Skirts
Side Skirts are ABS Plastic and they come with a ready to paint surface. The installation requires the removal of the OEM Side Skirt and replacing it with the new Astra/Hammond Side Skirts. The factory holes will be utilized to place the new part and will be bolted to the body of the car. The Side Skirt also uses 3M Double Sided tape to get further adhesion to the body of the car. Paint additional cost
Price: $349.99
Challenger Side Skirts Set, 09-10
Protect Your Investment with Car Door Edge Guards!
Dents, dings or scratches on a door edge can cause $250 or more in paint and body work. Protect and dress up your vehicle with custom-fit Door Edge Guards.
“ Won't fade, peel rust, fall off or harm paint finish. “ Fast and easy to install. Just tap them on and go.
. Made of plastic extruded chrome
“ No drilling, chemicals, glue or screws required. “ Custom fit to auto manufacturer's specifications
BeforeAfter
Price: $19.99
Door Edge Protection, Chrome Color
Front Set
Challenger Touch-Up Paint “ oz Tube
Keep your vehicle looking great with Mopar OEM touch-up paint. Available in factory colors, the Mopar touch-up allows you to easily hide and protect scratches and chips. Each 1/2 oz tube features a built-in applicator to provide quick and easy use.
Hides chips and scratches
Built-in applicator
OE factory paint colors
Featured in 1/2 oz tubes
Tip: Keep a spare tube in your glove box so you'll always know where to find it.
These splash guards provide excellent lower body protection from rain, snow, and other wayward road debris. Made from a composite of TPO plastic and TPR rubber, there rigid yet flexible. Each guard is molded to fit the contours of your Challenger and can be painted to match if desired.
Sold in sets for front or rear
Rugged composite construction
Black in finish, but can be painted
Mopar fit and quality
These splash guards are a great way to protect your vehicles paint form extra unneeded wear and tear. Deign and built for a perfect fit and outstanding quality.
Price: $55.95
Front or Rear Splash Guards Set
Choice:
Challenger Chrome Washer Sprayer Covers
Get your Challenger's exterior hood looking sharp with these Chrome Washer Sprayer Covers from Action Artistry. Constructed from 6061 T6 billet aluminum, these unique pieces install directly over your existing Washer Sprayer using pre-applied, automotive-grade adhesive with no fabrication required. Simply prep the surface, then place, peel, and stick. Easy installation and precision craftsmanship make this a great way to set your Challenger apart from the rest.
Constructed from 6061 T6 billet aluminum
Spcifically tailored for your Dodge Challenger
No drilling, cutting, or fabrication required
Price: $42.99 Set of 2
Challenger Chrome Washer Sprayer Caps
Dodge Challenger Stainless Steel Side Marker Trim
This is a set of 4 High Quality Stainless Steel Side Marker Trim Pieces for the 2009 Dodge Challenger
Price: $79.99
Challenger Stainless Steel Side Marker Trim
Dodge Challenger 5.7 and SRT 8 Bumper Insert Trim Plate 2008-2013 Brushed or Polished
Dress up your Challenger with our Polished or Brushed - Stainless Steel, Bumper Insert Trim Plate. These trim pieces are designed to fit over the stock rear bumper and add a clean stylish look to your Challenger exterior.
100% Stainless Steel.
Polished, mirror finish or Brushed finish.
Will not tarnish, fade or rust.
Adds a unique look and style to your car.
Easy "peel and stick" installation takes just minutes.
Fits all 2008-2013 Challengers.
NOTE: Select Brushed or Polished finish when ordering.
Made in USA!
Price: $89.99 Bumper Insert Trim Plate 2008-2013 Brushed or Polished
Choice:
2009-10 Challenger - T1 Series Rear Bumper Trim - 2 PC
Price: $139.95
T-Rex Stainless Rear Bumper Trim
2009-10 Dodge Challenger - T1 Series Tail Light Trim - 4 PC
Price: $121.99
T-Rex Tail Light Trim 4 Piece Set
Dodge Challenger Taillight Outer Trim Plate 2008-2013
Dress up your Challenger with our Polished - Stainless Steel Taillight Outer Trim. These trim pieces are designed to fit over the stock taillight and add a clean stylish look to your Challenger exterior.
100% Stainless Steel
High Polished or Brushed finish.
Will not tarnish, fade or rust.
Adds a unique look and style to your car.
Easy "peel and stick" installation takes just minutes.
Fits all 2008-2013 Challengers.
Made in USA!
Price:$92.00
Taillight Outer Trim Plate 2008-2013
Coverking Coverguard Universal Car Covers
This lightweight, single-layer polypropylene fabric provides good basic protection against harmful UV damage from the sun. if your neck of the woods stays nice and mild 300 days a year, then Coverking Coverguard Universal Car Covers are your best bet for affordable finish protection. These entry-level car covers are perfect for protecting against mild weather, but not torrential downpours or ice storms.
Because your Coverking Coverguard Universal Car Cover is constructed from 1 layer of Spunbond Polypropylene, it remains incredibly lightweight for easy installation and storing. Plus, the fabric is treated with UV inhibitors to help fight off sun damage.
Features:
Breathable - Allows moisture and condensation to easily evaporate. Reduces heat build-up under the cover.
Dries Quickly - Won't rot or mildew.
Soft, Non-Abrasive Fabric - Won't shrink or stretch.
One (1) Year Limited Warranty - Against defects in workmanship and/or the fabric becoming unserviceable during normal use. Covercraft will repair or replace after required factory inspection.